Lane separation lines for competition purposes made by M-TC “Sport”
150mm diameter Wave-breakerLLC “MTC “Sport” produced lane separator lines with 150mm diameter wave-breakers, especially for Speed-Swimming Worl Championship, which took place at SI “Swimming Center”, Saint-Petersburg in 2009. These separation lines are meant for use at swimming competitions. Lane separators are stretched over the whole length of the pool and are fitted to both the side walls of the pool, for which they are made with attached fixing angles.
The lane separators are assembled on 4mm stainless steel cable with fittings: one star-wheel tensioner and spring or with two star-wheel tensioners.
As per the requirements for competition standard pools, the colour at the middle of the separation lines (cord) should be as follows:
- Two green cords for the side lanes (1 and 8).
- Four blue cord for lanes number 2, 3, 6 and 7.
- Three yellow cords for lanes 4 and 5.
The colour of the separator for 5 meters from the side walls (start and finish) must be red.
At the 15 meter mark from each of the side walls the separator must be distinguished along the cord with wave-breakers of a colour other than the basic colour, for example red.
In 50 meter pools the 25 meter mark must be distinguished with wave-breakers of a different colour, for example red.
|№||Photo||Description||Unit of measurement||Price, rub.||Add to cart|
|Anchors for fitting at pool sides|
(Anchor bolt, hook of stainless steel)
|Piece||2 840.00||add to cart|
|Horizontal anchor diameter 45mm|
(Mounted in the floor)
|Piece||2 830.00||add to cart|
|Holder block for fixing the lane separator line|
(mounted in horizontal anchor)
|Piece||2 070.00||add to cart|
|№||Photo||Description||Unit of measurement, m||Price, rub.||Model #||Add to cart|
|1 talrep corrosion-proof. 10 mm; 2 clips; 1 carbine. A cord 8mm (26m)||25||2 560.00||001-1038||add to cart|
|1 talrep corrosion-proof 10 mm.; 2 clips; 1 carbine. A cord 8mm (51m)||50||2 910.00||001-1039||add to cart|
|1 talrep corrosion-proof 10 mm.; 4 clips; 2 thimble 8 mm. A cable 4mm (26m)||25||8 700.00||001-1040||add to cart|
|1 talrep the corrosion-proof. 10 mm; 4 clips; 2 thimble 8 mm. A cable 4mm (51m)||50||9 800.00||001-2758||add to cart|
|1 ratchet; 1 spring. Locking a plate. A cable 4mm. (26m)||25||12 600.00||001-1042||add to cart|
|1 ratchet; 1 spring. Locking a plate. A cable 4mm. (51m)||50||13 800.00||001-0042||add to cart|
Note: Prices shown without assembly charges.
|Separator length||Quantity of red wave-breakers. Pcs||Quantity of different colour wave-breakers. Pcs||Quantity of red floats. Pcs||Quantity of different colour floats. Pcs|
Assembly plan of lane separation line (25m)
|5 meters||15 meters||5 meters|
Assembly plan of lane separation line (50 m)
|5 meters||40 meters||5 meters|